Table of Contents
Advertisement
Wireless dongle should connect to IPJC1
Start PBC:
•
◦ Press the IPJC1 WPS button and wait for WPS LED blinking
◦ Press the dongle WPS button
◦ Wireless dongle should connect to IPJC1
WDS
When selected in the Basic Settings page and enabled here, Wireless Distribution
System (WDS) enables the router to be used as a wireless bridge. Two Wireless-N
Routers in bridge mode can communicate with each other through their wireless
interfaces. To accomplish this, all wireless routers should be set to the same channel
and the MAC address of other AP / Routers should be entered in the table.
The WDS explanation is as the following picture
Router_A：
a Set the connection mode to "AP+WDS" from "Wireless Basic Setting", and
then select the channel number (this example is "11"). Click Apply Changes to
save the setting.
Advertisement
Table of Contents
