Sapido IPJC1n User Manual page 67

WPS
This page allows user to change the setting for WPS (Wi-Fi Protected Setup). Using
this feature could let your wireless client atomically synchronize it's setting and
connect to the Access Point in a minute without any hassle. SAPIDO IPJC1 could
support both Self-PIN or PBC modes, or use the WPS button (at real panel) to easy
enable the WPS function.
PIN model, in which a PIN has to be taken either from a sticker label or from the
web interface of the WPS device. This PIN will then be entered in the AP or client
WPS device to connect.
PBC model, in which the user simply has to push a button, either an actual or a
virtual one, on both WPS devices to connect.
IPJC1 WPS only support no encryption and WPA2
Please follow instructions below to enable the WPS function.
Setup Wireless LAN with WPS PIN :
•
◦ Get the WPS PIN number from wireless card and write it down.
◦ Fill in the PIN number from the wireless card in Client PIN Number field,
and then click "Start PIN".
◦ Click PIN from Adapter Utility to complete the WPS process with the
wireless router.