Short GI
WLAN Partition
20/40MHz Coexist
RF Output Power
packets are transmitting.
Users can get better wireless transmission efficiency
when they enable this function.
Shut down the communication between the
connected wireless LAN devices.
If you set up as "Enabled", devices connected
with the router, such as a printer, will not be able
to use.
Default Setting: "Disabled"
Configure 20/40MHz coexisting scheme.
If you set up as "Enabled", "20MHz" and "40MHz"
will coexist.
Normally use as "Disabled".
Default Setting: "Disabled"
Users can adjust RF output power to get the best
wireless network environment. Users can choose from
100%, 70%, 50%, 35%, and 15%.