Table of Contents
Advertisement
LAN
Use this page to set up the local IP address and subnet mask for your router. Please
select LAN Interface Setup under the IP Config menu and follow the instructions
below to enter the LAN setting page to configure the settings you want.
Item
IP Address
Subnet Mask
Gateway
DHCP
DHCP Client Range
DHCP Lease Time
Static DHCP
Domain Name
802.1d Spanning Tree
Description
The default value of LAN IP address is 192.168.1.1 for
this router.
Input Subnet Mask, normally it is 255.255.255.0.
Input ISP Default Gateway Address. If you don't know,
please check with your ISP.
Enable or disable DHCP services. The DHCP server
will automatically allocate an unused IP address from
the IP address pool to the requesting computer if
enabled.
Define the DHCP client range and then the DHCP
server will assign an IP to the requesting computer
from this range. The Show Client will display every
assigned IP address, MAC address, and expired time.
The default range is 192.168.1.100 - 192.168.1.200.
IP avaliable time
Please refer
IP Binding
The name of device
IEEE 802.1d Spanning Tree Protocol (STP) is a link
layer network protocol that ensures a loop-free
topology for any bridged LAN. The main purpose of
STP is to ensure that you do not create loops when you
have redundant paths in your network. Loops are
Advertisement
Table of Contents
