Sapido IPJC1n User Manual page 23

support the auto Detect function as default,you can plug-in the cable of wan connect
to wan port, the Router to automatically search your Internet connection for servers
and protocols. The connection type will be reported when an active Internet service
is successfully detected by the Router. This report is for your reference only. To make
sure the connection type your ISP provides , please refer to the ISP. The various
types of Internet connections that the Router can detect are as follows:
• PPPoE -Connections which use PPPoE that requires a user name and password.
• Dynamic IP -Connections which use dynamic IP address assignment.
• Static IP -Connections which use static IP address assignment.
• 3.5G Dongle- Plugin the 3.5G dongle to USB port, Connections which use 3.5G
that requires a password, Default password is null.
• S m art p h o n e - Plugin the iphone to USB port and open the "personal Hotspot" function
in iphone.IPJC1 will auto share the internet connection with iphone.
5.2 AP Mode
If user has the other router is already set but need to extend more LAN ports in the
environment.user also want to make the wireless LAN communication. He can
switch the mode to AP mode.please move the switch to middle(show as below) In
the mode, all clients get IP from upper side(other Router) device,IPJC1 don't assign
the IP to client.so this mode does not support
WAN、DHCP、NAT、DDNS、QoS、Firewall、Static/Dynamic route、VPN Server
features