Sapido IPJC1n User Manual page 62

Network Type
SSID
Channel Width
Control Sideband
Channel Number-2.4GHz
Broadband SSID
WMM
Data Rate
Associate Clients
Enable MAC Clone
(Single Ethernet Client)
Enable Universal
Repeater Mode (Acting
as AP and Client
simultaneously)
SSID of Extended
Interface
Multiple AP
Save & Apply
* In Wi-Fi AP mode only support Client mode.
Infrastructure：one of the two methods for
•
connecting to wireless networks with Wi-Fi
enabled devices such as laptops, Pda's I-phone
etc. These devices are connected to wireless
network with the help of Access point (AP).
Wireless Access Points are usually routers or
switches which are connected to internet by
Ethernet port.
Ad hoc：By using ad hoc mode, devices are
•
capable for communicating directly with each
other. No Access point (routers / switches) is
required for communication between devices
and all devices in the range connect in peer to
peer communication mode.
Service Set identifier, users can define to any or keep
as default.
Please select the channel width, it has 3 options:
20MHz / 40MHz / Auto
Enable this function will control your router use lower or
upper channel.
Please select the channel; it has Auto, 1, 2~11 or 13
options.
User may choose to enable Broadcast SSID or not.
Enable / Disable Wi-Fi Multimedia
Please select the data transmission rate.
Check the AP connectors and the Wireless connecting
status.
Clone the MAC address for ISP to identify.
Allow to equip with the wireless way conjunction upper
level, provide the bottom layer user link in wireless and
wired way in the meantime.
(The IP that bottom layer obtains is from upper level.)
Please also check Section 4.1.2.2
While linking the upper level device in wireless way,
you can set SSID to give the bottom layer user search.
IPJC1 can register up to 4 SSIDs (wireless LAN
group). It can be used as if there are multiple wireless
LAN access points with one product. Each SSID could
be set with different data rate, WMM and access type
Click on "Save" to save the setting data. The "Apply"
button can execute current configuration