Panduit Atlona AT-HDR-SW-52 Installation Manual
  1. Manuals
  2. Brands
  3. Panduit Manuals
  4. Matrix Switcher
  5. Atlona AT-HDR-SW-52
  6. Installation manual
Panduit Atlona AT-HDR-SW-52 Installation Manual

Panduit Atlona AT-HDR-SW-52 Installation Manual

4k/hdr 5x2 hdmi matrix switcher
Hide thumbs Also See for Atlona AT-HDR-SW-52:
Table of Contents

Advertisement

Quick Links

Download this manual
4K/HDR
5x2 HDMI Matrix Switcher
AT-HDR-SW-52
The Atlona AT-HDR-SW-52 is a 5×2 HDMI matrix switcher for high dynamic range (HDR) formats.
Part of the comprehensive family of Atlona 4K HDR integration products, it features five HDMI
inputs and matrixed or mirrored HDMI outputs. The HDR-SW-52 is HDCP 2.2 compliant and
supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to
18 Gbps. It is ideal for the latest as well as emerging 4K/UHD and HDR sources and displays,
and includes EDID management features, and automatic input switching. Additionally, 4K
downscaling to 1080p @ 60, 30, or 24 Hz is available for the HDMI outputs when connected to
an HD display. The HDR-SW-52 can de-embed audio from an HDMI input to S/PDIF or balanced
analog audio outputs. This HDMI switcher can be controlled via Ethernet, RS-232, and IR.
Package Contents
1 x AT-HDR-SW-52
1 x Captive screw connector, 2-pin
1 x Captive screw connector, 3-pin
1 x Captive screw connector, 5-pin
1 x Long rack ear
1 x Short rack ear
2 x Mounting plates
4 x Mounting screws
4 x Rack screws
4 x Feet w/rubber grips
1 x 5 V / 4 A DC power supply
IMPORTANT: Visit https://www.atlona.com/product/at-hdr-sw-52 for the latest
firmware updates and User Manual.
1
Installation Guide
AT-HDR-SW-52

Advertisement

Table of Contents
loading

Related Manuals for Panduit Atlona AT-HDR-SW-52

Summary of Contents for Panduit Atlona AT-HDR-SW-52

  • Page 1 5x2 HDMI Matrix Switcher AT-HDR-SW-52 The Atlona AT-HDR-SW-52 is a 5×2 HDMI matrix switcher for high dynamic range (HDR) formats. Part of the comprehensive family of Atlona 4K HDR integration products, it features five HDMI inputs and matrixed or mirrored HDMI outputs. The HDR-SW-52 is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps.

  • Page 2: Front Panel Descriptions

    Installation Guide AT-HDR-SW-52 Front Panel Descriptions HDMI 1 POWER INPUT HDMI 2 HDMI 3 HDMI 4 HDMI 5 AT-HDR-SW-52 VOLUME HDMI 1 - HDMI 5 Cursor Buttons AUDIO These LED indicators display which input Press and release these buttons to RS-232 is routed to the HDMI OUT ports.

  • Page 3: Rear Panel Descriptions

    Installation Guide HDMI 1 POWER INPUT HDMI 2 AT-HDR-SW-52 HDMI 3 HDMI 4 HDMI 5 AT-HDR-SW-52 VOLUME Rear Panel Descriptions AUDIO RS-232 S/PDIF OUT RX TX HDMI IN HDMI OUT DC 5V HDMI IN Connect an HDMI cable from each of Connect an Ethernet cable from this port these ports to an HDMI source.
  • Page 4 Installation Guide HDMI 1 POWER INPUT AT-HDR-SW-52 HDMI 2 HDMI 3 HDMI 4 HDMI 5 Power VOLUME Connect the included 2-pin captive screw connector to the DC 5V power receptacle on the rear of the unit. The captive screw comes pre-wired as shown. AUDIO RS-232 S/PDIF OUT...
  • Page 5 Installation Guide AT-HDR-SW-52 Audio The included 5-pin captive screw block can be wired to support balanced audio using XLR connectors, or unbalanced audio using RCA connectors. Balanced Audio (XLR) Channel Signal (AT-HDR-SW-52) Pin (XLR) GND* *The GND signal, from the 5-pin captive screw connector on the AT-HDR-SW-52, should be tied to pin 1 on both XLR connectors.

  • Page 6: Installation

    Installation Guide AT-HDR-SW-52 Installation Connect a source device to each of the HDMI IN (1 - 5) ports. Connect a display device to each of the HDMI OUT (1 - 2) ports. Connect an Ethernet cable from the LAN port to the Local Area Network (LAN). This step will be required in order to access the built-in web server.
  • Page 7 Installation Guide AT-HDR-SW-52 IP Configuration The AT-HDR-SW-52 is shipped with DHCP enabled. Once connected to a network, the DHCP server (if available), will automatically assign an IP address to the unit. If the AT-HDR-SW-52 is unable to detect a DHCP server within 15 seconds, then the unit will use a self-assigned IP address within the range of 169.254.xxx.xxx/16.

  • Page 8: Accessing The Built-In Web Server

    Installation Guide AT-HDR-SW-52 Accessing the built-in Web Server The AT-HDR-SW-52 includes a built-in web server, which allows easy management and control of all features. Follow the instructions below to access the web server. Make sure that an Ethernet cable is connected between the LAN port on the AT-HDR- SW-52 and the network.
  • Page 9 Installation Guide AT-HDR-SW-52 Notes...
  • Page 10 Installation Guide AT-HDR-SW-52 Notes...
  • Page 11 Installation Guide AT-HDR-SW-52 Notes...

  • Page 12: Warranty

    Installation Guide AT-HDR-SW-52 Warranty To view the product warranty, use the following link or QR code: https://atlona.com/warranty/. English Declaration of Conformity The English version can be found under the resources tab at: https://atlona.com/product/at-hdr-sw-52/. Chinese Declaration of Conformity 中国RoHS合格声明 由SKU列出於: https://atlona.com/about-us/china-rohs/. ®...

Table of Contents