Preconditions For Use; Improper Device Modifications; Requirements For Special Applications - Siemens SITRANS L LCS100 Operating Instructions Manual

Table of Contents

Safety notes

2.3 Preconditions for use

2.3

Preconditions for use

This device left the factory in good working condition. In order to maintain this status and to

ensure safe operation of the device, observe these instructions and all the specifications

relevant to safety.

Observe the information and symbols on the device. Do not remove any information or

symbols from the device. Always keep the information and symbols in a completely legible

state.

2.3.1

Risk to personnel, system, and environment can result from modifications to the device,

particularly in hazardous areas.

• Only carry out modifications that are described in the instructions for the device. Failure

2.4

Due to the large number of possible applications, each detail of the described device versions

for each possible scenario during commissioning, operation, maintenance or operation in

systems cannot be considered in the instructions. If you need additional information not

covered by these instructions, contact your local Siemens office or company representative.

Note

Operation under special ambient conditions

We highly recommend that you contact your Siemens representative or our application

department before you operate the device under special ambient conditions as can be

encountered in nuclear power plants or when the device is used for research and

development purposes.

WARNING

to observe this requirement cancels the manufacturer's warranty and the product

approvals. Do not operate the device after unauthorized modifications.

SITRANS LCS100 2-wire mA and Relay Version

Operating Instructions, 05/2023, A5E52142831-AA

Table of Contents