Description Of Warning Stickers - PRITEC ACROS 80S Manual

2.4 Description of warning stickers

NOTE: Place the CNC cutting
table in a well-ventilated area
and on a stable surface. Melting
metals can cause unpleasant
odors and smoke during cutting.
WARNING: HOT, DO NOT TOUCH
The plasma cutter head and cut
workpieces reach high
temperatures during cutting.
Make sure everything has cooled
down before touching these
parts again. Or use the correct
gloves and PPE for this.
WARNING: MOVING PARTS Be
careful of your fingers and other
body parts when the cutting
table is in operation. The moving
parts of your PRITEC ACROS can
potentially cause damage. Do
not touch the rotating parts of
the cutting table when it is in
use.
WARNING: Do not place the
cutting table near flammable
materials.
NOTE: Be careful with electrical
voltage. The control box is
powered with 220 volts AC and
the output voltage is 24 volts DC.
WARNING: STAY NEAR THE CNC
CUTTING TABLE WHEN IT IS IN
USE.
CAUTION: Disconnect the plug
from the socket in case of
emergency or short circuit.
Safety glasses required
Safety shoes required
Gloves required
Use instructions for use
PLEASE NOTE: The emergency
stop is mounted on the control
box and must be within reach at
all times during operation.
6