Specific Safety Regulations For Cnc Cutting Tables - PRITEC ACROS 80S Manual

2.3 Specific safety regulations for CNC cutting tables

1. Do not use the machine until it has been assembled and installed according to the instructions in this
user manual.
2. If you are not familiar with/have never worked with a CNC cutting table before, please first be instructed
and/or guided by an experienced/specialized person.
3. Follow all technical requirements and prescribed electrical connections.
4. Use guards and protection at all times and check in advance that they are in place and functioning
properly.
5. Keep fingers, hands and arms away from gears and other rotating parts.
6. Avoid unusual controls and hand positions where unexpected slippage could result in contact with the
plasma head.
7. Never start the machine with the plasma head against the workpiece.
8. Use an extraction system.
9. Support long or wide workpieces with material supports/roll stands.
10. Disconnect the machine from the power supply before adjusting settings, installing or removing
accessories or when maintenance or repairs are carried out on the machine.
11. Disconnect the machine from the power supply and clean the machine and working
environment before leaving.
12. We recommend using the following Personal Protective Equipment (PPE): safety shoes, gloves and
safety glasses.
5