1. Manuals
  2. Brands
  3. PRITEC Manuals
  4. Cutter
  5. ACROS 80S
  6. Manual

PRITEC ACROS 80S Manual

Cnc cutting table
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ACROS
80S/150S
CNC CUTTING TABLE
MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for PRITEC ACROS 80S

  • Page 1 ACROS 80S/150S CNC CUTTING TABLE MANUAL...

  • Page 2: Table Of Contents

    5. Machine assembly ..................................9 5.1 Transport and storage ................................10 6. Software installation ................................... 11 6.1 Installation software for PRITEC ACROS ..........................11 6.2 Installing software to write G-code ............................17 7. Start-up ......................................17 7.1 Setting the workpiece zero point ............................18 7.

  • Page 3: General Information

    1.1 Introduction This manual will help you get started with using your PRITEC ACROS. Read the manual carefully so that you can make full use of your cutting table and cut the most fantastic products.

  • Page 4: How Do I Create G-Code

    G-code that the machine can read. Sometimes both processes can be performed with the same program. Check out our site for the possibilities https://www.pritec-automation.com 2. Safety regulations 2.1 Basic principle of safety in the workplace Most accidents occur because safety regulations are not taken into account or are ignored.
  • Page 5 This may only be done by a recognized company/technician and defective parts may only be replaced with original PRITEC parts, which are available at your PRITEC sales point.

  • Page 6: Specific Safety Regulations For Cnc Cutting Tables

    2.3 Specific safety regulations for CNC cutting tables 1. Do not use the machine until it has been assembled and installed according to the instructions in this user manual. 2. If you are not familiar with/have never worked with a CNC cutting table before, please first be instructed and/or guided by an experienced/specialized person.

  • Page 7: Description Of Warning Stickers

    The moving parts of your PRITEC ACROS can potentially cause damage. Do not touch the rotating parts of the cutting table when it is in use.

  • Page 8: Accessory Checklist

    3. Accessory checklist Description Number Power cable USB cable Cable guide with S-hook Cable retention straps Laptop support 3-piece + 4x M5x16 incl. nut and washer Cutting strips Machine leveling feet Control cable THC controller...

  • Page 9: Technical Specifications

    Control cable switching plasma cutter on/off 4. Technical specifications 4.1 Machine specifications Acros 150S Acros 80S Table dimensions (LxWxH) 1880 x 1260 x 1150mm 1200 x 1100 x 1100mm Total weight 109kg 80kg Cutting surface 1500 x 1000mm 800 x 1000mm...

  • Page 10: Machine Assembly

    4.4 Machine layout Plasmasnijder (geleverd door PRITEC of door 5. Machine assembly Tools required for assembly: Figuur 1 • Allen key 3 and 5 mm • Open-end wrench 13 mm 2x Follow the instructions of the assembly drawing on the manuals page on our website.

  • Page 11: Transport And Storage

    5.1 Transport and storage Transporting material When loading/unloading or transporting the equipment at the workplace, you must use suitable transport and lifting equipment (e.g. crane/forklift, truck). Ensure that components are lifted and transported carefully so that they cannot fall, taking into account package size, weight, center of gravity and fragile parts. Use a forklift or pallet truck to transport the package (figure 1).

  • Page 12: Software Installation

    After installation, we recommend that you use the laptop's power cable as a power source instead of the laptop battery when operating the ACROS. 6.1 Installation software for PRITEC ACROS control Download operating software The plasma table is controlled by so-called “control software”. The software is freely accessible and easy to download via the website.
  • Page 13 A screenshot of the Mach3 software installation welcome screen. The installer recommends closing all Windows applications before the installation begins. Once this has been done, click Next . Read the following text carefully . Make sure the text is understood and then click Yes . If it is not agreed, click No .
  • Page 14 Click Next . Attention ! Make sure that Mach3 is always installed in C:\Mach3 . This is important for the correct installation of the program. This is because the installer assumes that Mach3 is installed in C:\Mach3 to copy the profiles of the machines.
  • Page 15 Click Next . This screen is not important for the installation itself, but can help keep your computer organized. You can enter whatever you want here. Click Next .
  • Page 16 This is the final step before installing the software. Click Next . This screen shows which files are being copied. Typically, installation takes no longer than three minutes. Do not close the program if it takes longer.
  • Page 17 The installation notes that external components have been successfully installed. Click OK . This last screen shows the completion of the installation. After a short moment of patience, you will automatically switch to the next screen. Mach3 installation is complete! This menu offers the option to install additional components for the program. It has been decided not to install any other profiles ( XMLs ) that come with the program and LazyCam will not be installed either.

  • Page 18: Installing Software To Write G-Code

    Generating a machine code (G-code) can be done using various programs. You may already have the right software for this. If not, look for the options at https://pritec-automation.com/pages/kennis-artikelen 7. Start-up 1. Connect the USB cable to the control box and to your laptop.

  • Page 19: Setting The Workpiece Zero Point

    7.1 Set workpiece zero point When you create a g-code, a zero point (reference point) is created. This is the starting point of the process. You can set a zero point at any point on the table. Figure 5 example zero point 1.

  • Page 20: Tests

    THC control cable from the control box, so that the THC controller does not receive any values and will therefore not respond. For more information go to: https://pritec-automation.com/pages/toorts-hoogte-controller 9.1 Settings The Proma SD is set with standard factory settings. After proper connection, it can be controlled by most plasma cutters.
  • Page 21 If you then press and hold the ''up/down'' arrows simultaneously for a few seconds, you will enter the voltage settings. Changing this value with the arrows controls the height the controller must maintain between the plasma head and the workpiece. If you briefly press the arrows simultaneously again, it will maintain the set value. (see chapter 9.2) Figuur 3 To change the other parameters if desired, press and hold both buttons until the correct parameter appears on the...

  • Page 22: Determining Thc Voltage

    9.2 Determine THC voltage As mentioned earlier, you can cut without THC if desired by disconnecting the signal cable. If you want to work with the THC, the voltage to be set will depend on the cutting speed and the material to be cut (thickness, strength, etc.) .
  • Page 23 If you connect your own plasma cutter, consult the manual of the relevant machine. Connection as described in point 1. Connection as described in point 2.

  • Page 24: Control Panel (Basic Elements)

    10. Control panel (basic elements) 1. Cutting path display - This shows the cutting path of the loaded G-code file. 2. ''TORCH'' on/off - This turns the arc of the plasma cutter on and off. 3. ''JOG'' controller X/Y – By clicking on the arrows you can control the X and Y axes. 4.

  • Page 25: Maintenance Overview

    The plasma cutter amperes are not set correctly. • The plasma nozzle is worn or incorrect. For more troubleshooting, visit: https://pritec-automation.com/pages/problem-solutions 13. Warranty • The warranty comes into effect on the date stated on the purchase invoice and is valid for 12 months.
  • Page 26 • The warranty only applies if the product is used in accordance with the supplied instructions and exclusively for the purpose for which it was designed. • The warranty does not cover damage caused by incorrect construction, installation, use, cleaning, use of cleaning agents, maintenance or repair.

  • Page 27: Ec - Declaration Of Conformity

    2014/35/EU - Low voltage Declaration We hereby declare that the above product CE responsible: Date: (series) complies with the guidelines / standards mentioned in this declaration. P. Prinsen 10-11-2020 PRITEC Kiefteweg 11 7121 LX Aalten Phone: +31543722292 Email: info@pritec-automation.com __________________ Website: www.pritec-automation.com Signature...

This manual is also suitable for:

Acros 150s

Table of Contents