Table of Contents
Advertisement
The installation notes that external components have been successfully installed. Click OK .
This last screen shows the completion of the installation. After a short moment of patience, you will automatically
switch to the next screen.
Mach3 installation is complete! This menu offers the option to install additional components for the program. It has
been decided not to install any other profiles ( XMLs ) that come with the program and LazyCam will not be installed
either.
Load Mach3 driver is an option to immediately check whether the table can connect to the computer. If you are just
installing the software and the table is not connected to the computer at the time, you will see the following screen.
If the table is connected to the computer, the connection is tested.
16
Advertisement
Table of Contents
