This final screen confirms the completion of the installation. The profiles have been copied, shortcuts created and
the program is ready to use. Click Close .
6.2 Installing software to write G-code
Generating a machine code (G-code) can be done using various programs. You may already have the right software
for this. If not, look for the options at
7. Start-up
1. Connect the USB cable to the control box and to your laptop.
2. Plug the power cable into the control box and switch on the red switch.
3. Open Mach3 CNC Controller and click on the blue RESET icon after startup. Make sure the emergency stop is
turned off. The ACROS can now be operated using the arrow keys on your keyboard (Z = Page Up/Page
Down). Use the space key on your keyboard to have the machine automatically return to its home position.
The machine will search for the home switches one by one.
https://pritec-automation.com/pages/kennis-artikelen
17