Philips Respironics DreamStation CPAP User Manual page 16

Icon Text
Humidi昀椀cation
Mask Type
Tube Type
Language
Check Mask Fit
Modem
Bluetooth
Time
14
This displays the Humidi昀椀cation Mode being used. You can choose between
Fixed or Adaptive Humidi昀椀cation. If a heated tube is being used, the device will
automatically switch to Heated Tube Humidi昀椀cation Mode. A "lock" symbol will
appear next to the mode setting indicating that so long as the heated tube is
attached to the device, this mode cannot be changed. However, the heater plate
and tube temperature settings can still be adjusted on the device Therapy screen
as normal.
This setting allows you to adjust the level of air pressure relief based on the
speci昀椀c Philips Respironics mask. Each Philips Respironics mask may have a
"System One" resistance control setting. Contact your home care provider if
you cannot 昀椀nd this resistance setting for your mask.
This setting allows you to select the correct size diameter tubing that you are
using with the device. You can choose either (22) for the Philips Respironics 22
mm tubing, (15) for the Philips Respironics 15 mm tubing, or (12) for the optional
Philips Respironics 12 mm tubing. When using Heated Tubing, the device will
automatically change this setting to the appropriate tubing type (15H) and you
will not be able to change it.
Note: Tubing is identi昀椀ed on the cuff with the tubing identi昀椀er symbol: "12",
"15", or "15H". 22 mm tubing contains no symbol.
This feature allows you to choose which language to display on the interface. You
can choose English or Spanish.
This feature allows you to check the 昀椀t of your mask prior to starting therapy.
This is done by measuring the amount of leak.
Allows you to turn modem off temporarily or turn it back on. When modem
is turned off, it will automatically turn on again after 3 days. Only displays when
modem is installed.
Allows you to turn Bluetooth off and on. Also, it allows you to clear the pairing
with a compatible Bluetooth device.
Allows you to adjust the time. The default setting is Greenwich Mean Time, but
you may adjust the time in 30 minute increments to match your local time zone.
Note: This time setting is not displayed as a clock function on the device. It is
only used to align your therapy data for your Provider's data reports.
Description
User Manual