Menu Navigation (Therapy On) And Optional Humidi昀椀Cation Settings; Ramp Feature - Philips Respironics DreamStation CPAP User Manual

Menu Navigation (Therapy ON) and Optional Humidi昀椀cation Settings
While the device is delivering therapy, you can adjust Tube Temperature or Humidi昀椀er Settings. Rotate the control dial
to choose either setting. Press and rotate the dial to change the setting.
Note: If you are using the Humidi昀椀er without the Heated Tube, simply just rotate the control dial to change the
Humidi昀椀er setting.
# Feature
1 Therapy Pressure
Adjustable Tube Temperature
2
Setting
Adjustable Humidi昀椀er Setting
3
4
Enabled Features

Ramp Feature

The device is equipped with an optional ramp feature that your home care provider can enable or disable. This
feature reduces the air pressure when you are trying to fall asleep and then gradually increases (ramps) the pressure
until your prescription setting is reached, allowing you to fall asleep more comfortably.
If ramp is enabled on your device, after you turn on the air昀氀ow, press the Ramp (
device. You can use the Ramp button as often as you wish during the night.
When you click the ramp button, the Therapy screen will change to re昀氀ect the Ramp pressure, and the green circle
will re昀氀ect the gradual increase in pressure.
Ramp Pressure Screen
Your device has two ramp modes. Your Provider will select the one that is most appropriate for you. The standard
ramp mode increases pressure at a steady rate. Alternately, the SmartRamp mode maintains a constant lower
pressure until the device detects that you require more pressure.
10
Therapy Pressure Screen
Displays the current delivered pressure.
You can change this setting from 0 to 5. Only displays when optional
heated tube is connected.
You can change this setting from 0 to 5. Only displays when
humidi昀椀er is attached.
Depending on setup, certain enabled therapy features will display
here.
Description
) button on the top of the
User Manual