Troubleshooting Guide; Specifications - Cocraft TY-MT300C-UK Original Instructions Manual

Multi-tool 300 w tool-free accessory change system
Table of Contents

Advertisement

Available languages
  • EN

Available languages

Troubleshooting guide

The multi-tool will not start.
The motor runs slowly.
The machine vibrates or
emits abnormal noises.
Responsible disposal
This symbol indicates that this product should not be disposed of with general
household waste. This applies throughout the entire EU. In order to prevent
any harm to the environment or health hazards caused by incorrect waste
disposal, the product must be handed in for recycling so that the material can
be disposed of in a responsible manner. When recycling your product, take it to
your local collection facility or contact the place of purchase. They will ensure that
the product is disposed of in an environmentally sound manner.

Specifications

Rated voltage
No-load speed
Oscillation angle
Power
Sound pressure level
Vibration level
Weight
Make sure the mains lead is undamaged and securely
connected to the wall socket.
Check that the wall socket is live.
Worn/damaged accessory. Replace the accessory with
a new one.
Speed set too low for the task. Increase the speed setting.
Check that the accessory is fitted correctly and that
the multi-tool is undamaged.
230−240 V AC, 50 Hz
11 000−20 000 rpm
3.2°
300 W
LpA = 84.5 dB(A), K = 3 dB(A)
LwA = 95.5 dB(A), K = 3 dB(A)
Always wear ear protectors/defenders for noise levels exceeding 80 dB(A)
a
= 3.611 m/s², K = 1.5 m/s²
h
1.4 kg
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hmt300Ty-mt300c18-361941-1248

Table of Contents