Schiller BOB-CAT CRZ FR600V KAW W/48 SIDE DISCHARGE Parts & Operators Manual page 33

®
MOWERS
CRZ
PARKING BRAKE
NOTE: There are 2 brakes, 1 on each transaxle.
The parking brake should keep the machine from
moving. To check the parking brake, park the ma-
chine on a level surface, open the bypass valves and
set the parking brake to ON. Attempt to move the
machine forward and backward by pushing it. If the
machine moves, adjust the parking brake linkage as
follows:
1. Move the machine to a flat horizontal surface.
2. Move the parking brake handle to the OFF posi-
tion.
3. Remove cotter pin P from each brake link K and
brake rod R. Slide brake rod R out of each brake
link K and insure that the brake links are rotated
toward the rear of the machine. Reinsert rod R
into each link K and secure with cotter pin P.
4. The parking brake handle should be approxi-
mately horizontal when in the Off position. If the
brakes need to be adjusted, loosen the inner nut
M of the brake rod B. Tighten the outer nut L as
needed for the brakes to be engaged. Tighten in-
ner nut M.
5. Tighten brake nut N as needed. The length of
the threads protruding past the nut should mea-
sure 1/4" - 3/8".
6. Retest to insure the machine does not move.
ADJUSTMENTS
31