CONTROLS
®
MOWERS
CRZ
FOOT PEDAL LIFT LEVER (F)
- Used to raise
the cutterdeck for curb climbing, blade changing and
lifting the deck close to the transport position. To
return to preset height of cut, lower foot pedal until
latch lever E contacts height of cut pin A.
TRANSPORT LATCH LEVER (T)
- Used
to secure the cutterdeck in transport position. To
secure the deck, push the foot pedal F forward until
transport latch lever T engages into locking posi-
tion. To release transport latch lever T, push the foot
pedal F slightly forward to disengage latch and press
transport latch lever T downward. Allow foot pedal F
to rotate toward machine until latch lever E contacts
height of cut pin A.
HEIGHT OF CUT PIN (A)
- Sets height of cut
and allows easy return from transport to desired
height of cut. Raise the deck to transport using the
foot pedal and transfer latch lever T. Position pin
A in the hole corresponding to the desired height of
cut. Lower the latch lever until it rests on pin A.
14