Table of Contents
Advertisement
en Cleaning and servicing
Appliance
Surface
Suitable cleaning agents Information
Stainless steel
¡ Hot soapy water
¡ Special stainless steel
Enamel, plastic,
¡ Hot soapy water
painted, and
screen-printed
surfaces
E.g. control panel
Knobs
¡ Hot soapy water
Gas hotplate
¡ Hot soapy water
burners and pan
supports
Plinth drawer
¡ Hot soapy water
Appliance cover
Area
Suitable cleaning agents Information
Door panels
¡ Hot soapy water
Door cover
¡ Made of stainless
¡ Made of plastic:
Door handle
¡ Hot soapy water
Door seal
¡ Hot soapy water
Upper glass cover ¡ Glass cleaner
Hob
Area
Suitable cleaning agents Information
Enamelled sur-
¡ Hot soapy water
faces
¡ Vinegar solution
¡ Oven cleaner
Glass cover on
¡ Hot soapy water
the oven light
Rails
¡ Hot soapy water
22
cleaning products
suitable for hot sur-
faces
steel:
Stainless steel
cleaner:
Hot soapy water
To prevent corrosion, remove any limescale, grease, starch or albu-
min (e.g. egg white) stains on stainless steel surfaces immediately.
Apply a thin layer of the stainless steel cleaning product.
Do not use a glass cleaning product or a glass scraper.
Clean with a dish cloth and dry with a soft cloth.
Do not remove or scrub.
Clean the burner parts and pan support with a dish cloth.
Only use a little water. Water must not be allowed to enter the inside
of the appliance through the burner compartments.
Do not clean in the dishwasher.
Clean with a dishcloth.
Do not use a glass scraper or steel wool.
Tip: Remove the door panels in order to clean them thoroughly.
→ "Appliance door", Page 25
Do not use a glass cleaning product or a glass scraper.
Tip: To thoroughly clean the cover plate, remove the cover.
→ "Appliance door", Page 25
In order to avoid stubborn dirt, remove descaling agents from the
door handle immediately.
Do not remove or scrub.
Clean with a soft cloth.
Tip: Remove the upper glass cover for thorough cleaning.
→ "Top cover", Page 27
Soak any heavily soiled areas and use a brush or steel wool.
Leave the appliance cover open so that the hob can dry after it has
been cleaned.
Notes
¡ Enamel burns at very high temperatures, causing minor discol-
ouration. The functionality of the appliance is not affected by this.
¡ The edges of thin baking trays cannot be completely enamelled
and may be rough. This does not impair the corrosion protection.
¡ Food residues leave a white coating on the enamelled surfaces.
The coating does not pose a health risk. The functionality of the
appliance is not affected by this. You can remove these residues
with lemon juice.
Use oven cleaner to remove very heavy soiling.
Soak any heavily soiled areas and use a brush or steel wool.
Tip: Remove the shelf supports for cleaning.
→ "Rails", Page 24
Advertisement
Table of Contents
