Table of Contents
Advertisement
Turn the adjustable feet to align the appliance
Note:
¡ Do not align the appliance until all other work has
been completed.
¡ You can use the adjustable feet to increase the
height of the appliance by up to 45 mm.
¡ You must check the alignment of the appliance
once it has been installed in the intended location.
Adjacent units
Any adjacent units must not be made of flammable ma-
terials.
¡ The fronts of any adjacent units must be heat-resist-
ant up to at least 90 °C.
¡ If the appliance is installed very close to other units,
the minimum clearances specified in the figure must
be complied with.
Note: Ensure that the clearance between the appliance
and the back wall is at least 10 mm.
Installation and connection en
11
Advertisement
Table of Contents
