PCchips M851AG Manual page 33

OnBoard Serial
Use these items to enable or disable the
PortA
onboard COM1 serial port, and to assign a
port address.
OnBoard IR Port
Use this item to enable or disable the onboard
infrared port, and to assign a port address.
Onboard Parallel
Use this item to enable or disable the onboard
Port
LPT1 parallel port, and to assign a port
address. The Auto setting will detect and
available address.
Parallel Port Mode
Use this item to set the parallel port mode.
You can select SPP (Standard Parallel Port),
ECP (Extended Capabilities Port), EPP
(Enhanced Parallel Port), or ECP + EPP.
Parallel Port IRQ
Use this item to assign either IRQ 5 or 7 to
the parallel port.
Parallel Port DMA
Use this item to assign a DMA channel to the
parallel port. The options are 0, 1 and 3.
OnBoardPATA-IDE
Use this item to enable or disable the onboard
PATA-IDE channel.
Use this item to enable or disable the
OnBoard SATA-IDE
onboard SATA-IDE channel.
Modem Device
This item enables or disables the onboard
AC'97 modem chip.
Ethernet Device
This item enables or disables the onboard
Ethernet LAN.
USB Controller
Enable this item if you plan to use the USB
ports on this motherboard.
USB Function for
Enable this item if you plan to use the USB
DOS
ports on this motherboard in a DOS
environment.
ThumbDrive for
Enable this item to make a small portion of
DOS
memory storage device for the USB ports.
29