Install Other Devices - PCchips M851AG Manual

Please check the pin assignment of the cable and the USB
header on the motherboard. Make sure the pin assignment
will match before plugging in. Any incorrect usage may
cause unexpected damage to the system. The vendor won't
be responsible for any incidental or consequential damage
arising from the usage or misusage of the purchased
product.
SIR1: Infrared Port
The infrared port allows the wireless exchange of information
between your computer and similarly equipped devices such as
printers, laptops, Personal Digital Assistants (PDAs), and other
computers.
Pin Signal
1 NC
3 +5V
5 IRTX
1. Locate the infrared port SIR1 connector on the motherboard.
2. If you are adding an infrared port, connect the ribbon cable
from the port to the IR1 connector and then secure the port to
an appropriate place in your system chassis.

Install Other Devices

Install and connect other devices in the system as steps below.
FDC1
1
IDE1
1
Pin Signal
2 KEY
4 GND
6 IRRX
1 IDE2
15