Safety; Packing, Transportation And Storage - Icon Process Controls Level Pro UltraPro 500 Series Instruction Manual

ULTRAPRO 500 MANUAL
Ultrasonic level meters
USED SYMBOLS
In order to provide maximum safety of processes, we have defined the following safety and information instructions.
Each of the instructions is marked with an icon.
Alert, warning, danger
This symbol informs about particularly important instructions for installation and operation of the
equipment or about dangerous situations that may occur during installation and operation. Failure to
comply with the instructions may cause failures, damage or destruction of the equipment, or may cause
injuries to persons.
Information
This symbol informs about particularly important characteristics of the equipment.

1. SAFETY

Any operations described in this User's Guide may only be performed by trained personnel or by an authorized
person. Warranty and post-warranty repairs shall be performed exclusively on the manufacturer's site.
Improper use, installation or setting of the level meter may lead to crashes in the application (overfilling of the
tank or damage to system components).
The manufacturer is not responsible for improper use , work losses resulting from direct or indirect damage
and expenses incurred during installation or use of the level meter.
2. PACKAGING, TRANSPORT AND STORAGE
The UPS-500 or UPS-700 device is packed in a cardboard packaging and the whole shipment is placed in a cardboard
box. The cardboard box is suitably filled to prevent mechanical damage during transport. Remove the device from
the package just prior to its use to prevent possible damage.
Transport to the customer is provided by a forwarding company. Subject to prior arrangement, personal pick-up of
the ordered goods is possible in the company's seat. Upon receipt, please check whether the shipment is complete
and corresponds to the extent of the order, or whether during the transport the packaging and the device has not
been damaged. Do not use a device apparently damaged during transport and contact the manufacturer to resolve
the situation.
If the device is transported further, it shall be wrapped in the original packaging and protected against shocks and
weather.
Store the device in its original packaging in a dry place, sheltered from weather, with humidity up to 85% without the
effects of chemically active substances. The range of storage temperature is -20°C to +60°C.
Level meters (sensors) of variants UPS are fitted with protective caps to prevent damage
to the ultrasonic transducer. Remove the caps before commissioning!
www.iconprocon.com | sales@iconprocon.com | 905.469.9283
R