Table of Contents
Advertisement
PCI add-in card
PCI slot
Metal bracket
Edge connector
Add-in Card Options
The mainboard has two features that can be used if you have installed
either a fax/modem card or a network adapter card.
WOL1: Wake on LAN
If you have installed a network adapter (LAN adapter), you can use the
cable provided with the card to plug into the WOL1 connector on the
mainboard. This is the Wake On LAN feature. When your system is in a
power–saving mode, any traffic through the network automatically
resumes the system. You must enable this item using the Power
Management page of the setup utility. See Chapter three for more
information.
30
Advertisement
Table of Contents
