Table of Contents
Advertisement
Boot Up Floppy Seek
If this item is enabled, it checks the geometry of the floppy disk drives at start-up
time. You don't need to enable this item unless you have a old diskette drive with
360K capacity.
Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your system is
started.
Gate A20 Option
This item defines how the system handles legacy software that was written for an
earlier generation of processors. Leave this item at the default value.
Typematic Rate Setting
If this item is enabled, you can use the following two items to set the typematic
rate and the typematic delay settings for your keyboard.
Typematic Rate (Chars/Sec)
If the item Typematic Rate Setting is enabled, you can use this item to define
how many characters per second are generated by a held-down key.
Typematic Delay (Msec)
If the item Typematic Rate Setting is enabled, you can use this item to define
how many milliseconds must elapse before a held-down key begins generating
repeat characters.
Security Option
If you have installed password protection, this item defines if the password is
required at system start up, or if it is only required when a user tries to enter the
setup utility.
OS Select For DRAM > 64 MB
This item is only required if you have installed more than 64 MB of memory and
you are running the OS/2 operating system. Otherwise, leave this item at the
default Non-OS2.
Report No FDD for WIN 95
If you are running a system with no floppy drive and using the Windows 95 OS,
select Yes for this item to ensure compatibility with the Windows 95 logo
certification.
Video BIOS Shadow
This item allows the video BIOS to be copied to system memory for faster
performance.
Default: Enabled
Default: On
Default: Fast
Default: Disabled
Default: 6
Default: 250
Default: Setup
Default: Non-OS2
Default: Yes
Default: Enabled
45
Advertisement
Table of Contents
