Table of Contents
Advertisement
6. Secure the metal bracket of the card in the empty slot in the system
case with a screw.
7. For some add-in cards, for example graphics adapters and network
adapters, you have to install drivers and software before you can
begin using the add-in card.
Metal bracket
Add-in Card Options
The mainboard has two features that can be used if you have installed
either a fax/modem card or a network adapter card.
WOL1: Wake on LAN
If you have installed a network adapter (LAN adapter), you can use the
cable provided with the card to plug into the WOL1 connector on the
mainboard. This is the Wake On LAN feature. When your system is in a
power–saving mode, any traffic through the network automatically
resume the system. You must enable this item using the Power
Management page of the setup utility. See Chapter three for more
information.
30
PCI add-in card
Edge connector
PCI slot
Advertisement
Table of Contents
