Table of Contents
Advertisement
Infrared Port
This option can be purchased from third-party vendors.
1. If you are installing an optional serial infrared port, connect the cable
from the optional IR port to the SIR1 connector on the mainboard.
2. After you have connected the cable, secure the optional IR port to
the appropriate place on your system case.
Note: An IR port may use some of the resources required by a
second serial port or a fax/modem card. If you have more than
one of these items installed, you may not be able to use them at
the same time. You can use the Peripherals page of the setup
utility to switch resources between an IR port and a second serial
port. See Chapter 3 for more information.
SIR1
33
Advertisement
Table of Contents
