Table of Contents
Advertisement
... just the illumination is not working
Possible cause
▪ The halogen light is defective. ▸ Call Customer Services.
... the cooking time seems unusually long
Possible cause
▪ The appliance only has a
single-phase connection.
... no visible steam is produced when steaming
Possible cause
▪ The temperature of the cook-
ing space is over 100 °C.
... the food probe temperature is not displayed
Possible cause
▪ The food probe is not plugged
in correctly.
▪ In the selected automatic pro-
gramme, the food probe can-
not be used; the
is illuminated in grey.
▪ The food probe or the socket
is defective.
The food probe temperature is never displayed during the heating process.
... the control panel steams up
Possible cause
▪ Steam escaping when using
operating modes with steam.
... the appliance makes noises during operation
Possible cause
▪ The appliance may emit noise
when operating (e.g. switching
and pumping noises).
Solution
Solution
▸ Establish a two-phase connection.
Solution
No solution required:
Steam is invisible above 100 °C.
Solution
▸ Check whether the food probe is correctly plugged
into the socket.
▸ Check whether the food probe is correctly inserted
in the food: The tip must be in the centre of the
thickest part.
▸ If you wish to use the food probe in spite of this,
change to the
symbol
suitable operating mode.
▸ Call Customer Services.
Solution
It is normal for the control panel to steam up tempor-
arily.
▸ When closing the appliance door, make sure that it
forms a seal all the way round.
▸ If it keeps steaming up, call Customer Services.
Solution
Such noise is normal.
12 Trouble-shooting
operating mode menu and set a
47
Advertisement
Table of Contents
