Bauknecht STC 8303 Operating Instructions Manual page 46

Combi-steam cooker
Table of Contents

Advertisement

12 Trouble-shooting
For safety reasons, once started the descaling process cannot be cancelled.
Replacing the rinsing solution
▸ As soon as the corresponding message appears in the display, remove the water
tank, pour the rinsing solution away and fill it with 1 l warm water.
▸ Put the water tank back.
– The rinsing phase starts automatically.
– The following appears in the display: «Rinsing appliance.».
▸ Repeat the process as often as is necessary.
As the water is heated up during final rinsing, the appliance door may steam up.
Ending the descaling process
▸ As soon as the corresponding message appears in the display, remove, empty and
dry the water tank.
▸ Wipe up any water in the bottom of the cooking space with a soft cloth.
▸ To confirm the message, select
– The following appears in the display: «Appliance has been successfully descaled».
▸ To confirm the message, select
– The appliance is ready for operation again.
For the
,
pumped back into the water tank may not be clear. This will not affect the cooking
or baking characteristics nor the quality of the food being cooked or baked.
12
Trouble-shooting
12.1
What to do if ...
This section lists faults that can be solved simply by following the instructions given. If
another fault is displayed or the fault cannot be remedied, please call Customer Ser-
vices.
Before calling Customer Services, please note down the error message in full.
Fxx/Exxx see operating instructions
FNxxxxx xxxxxx.
... the appliance is not working
Possible cause
▪ A household fuse or circuit breaker has
tripped.
▪ The fuse or circuit breaker keeps blowing.
▪ An interruption in the mains power supply.
▪ Demo mode is switched on.
▪ The appliance is faulty.
46
.
.
,
or
operating modes, after descaling, the water that is
Solution
▸ Change the fuse.
▸ Reset the circuit breaker.
▸ Call Customer Services.
▸ Check the power supply.
It is only possible to switch off demo
mode with a safety code.
▸ Call Customer Services.
▸ Call Customer Services.

Advertisement

Table of Contents
loading

Related Products for Bauknecht STC 8303

This manual is also suitable for:

Stc 8363

Table of Contents