Table of Contents
Advertisement
5.11
Switching the appliance off
▸ Press the
touch button.
– An acoustic signal is emitted.
– Any running operating mode or application is ended; if switched on, the timer or
cooking space illumination will remain active.
– «
Residual heat» appears in the display.
– If the food probe is plugged in, the food probe temperature is displayed.
– The following message appears in the display after all operating modes with steam:
«Draining appliance. Please do not remove the water tank.»
▸ Press the
touch button again.
– All touch buttons go out.
– All functions are ended and switched off.
Or at the end of operation:
▸ Select the
option in the display.
– An acoustic signal is emitted.
– Any running operating mode or application is ended; if switched on, the timer or
cooking space illumination will remain active.
– The following appears in the display: «
– If the food probe is plugged in, the food probe temperature is displayed.
▸ Press the
touch button.
– All touch buttons go out.
– All functions are ended and switched off.
The appliance is switched off if none of the touch buttons are illuminated any more
and the display is dark.
The cooling fan can continue to run.
5.12
Emptying the water tank
Risk of scalding!
The water in the tank may be hot. If «Please do not remove the water tank» ap-
pears in the display, the temperature of the residual water is too high. Do not re-
move the water tank!
For safety reasons, the residual water is not pumped off until the temperature has
fallen below a certain level.
When the appliance is switched off, the residual water is pumped back into the water
tank.
The following appears in the display: «Water is being pumped off». When the water has
been pumped back:
▸ Remove, empty and dry the water tank.
▸ Put the water tank back.
Any operating mode can be started again.
Residual heat».
5 Using the appliance
21
Advertisement
Table of Contents
