Table of Contents
Advertisement
Before using
the handgrip
heart rate moni-
tor, remove the
sheets of plastic
from the metal
contacts. In addi-
tion, make sure
that your hands
are clean.
To measure your heart rate, stand on the foot
rails and hold the contacts with your palms for
approximately ten seconds; avoid moving your
hands. When your pulse is detected, your heart
rate will be shown. For the most accurate heart
rate reading, continue to hold the contacts for
about 15 seconds.
7. Turn on the fan if desired.
The fan features multiple
speed settings and an
auto mode. When the
auto mode is selected,
the speed of the fan will
automatically increase
and decrease as the
speed of the walking belt increases and decreases.
Press the fan increase button to increase the fan
speed. If you press the fan increase button once
while the fan is on its maximum speed setting,
the auto fan mode will be selected. Press the fan
decrease button repeatedly to decrease the fan
speed or to turn off the fan.
8. When you are finished exercising, remove the
key from the console.
Step onto the walking platform and touch the home
button or the back button on the screen or press
the Stop button on the console. A workout sum-
mary will appear on the screen. After you view
the workout summary, touch the Finish button to
return to the main menu. You may also be able to
either save or publish your results using one of the
options on the screen. Then, remove the key from
the console and put it in a secure place.
When you are finished using the treadmill, press
the power switch into the off position and unplug
the power cord. IMPORTANT: If you do not do
this, the treadmill's electrical components may
wear prematurely.
Contacts
18
HOW TO USE AN ONBOARD WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 15.
2. Select an onboard workout.
To select an onboard workout, press the Calorie
button, the Intensity button, the Incline button, or
the Speed button on the console.
Then, select the desired workout. The screen will
show the name, duration, and distance of the work-
out. The screen will also show the approximate
number of calories you will burn during the workout
and a profile of the incline settings of the workout.
3. Start the workout.
Touch the Start Workout button to start the work-
out. A moment after you touch the button, the
walking belt will begin to move. Hold the handrails
and begin walking.
Each workout is divided into several segments.
One speed setting and one incline setting are
programmed for each segment. Note: The same
speed setting and/or incline setting may be
programmed for consecutive segments.
During the workout, the profile will show your
progress. To view the profile, flick or slide the
screen. The vertical colored line will indicate the
current segment of the workout. The bottom profile
represents the incline setting of the current
segment. The top profile represents the speed
setting of the current segment.
At the end of the first segment of the workout, the
treadmill will automatically adjust to the speed
and/or incline settings for the next segment.
Advertisement
Table of Contents
