Table of Contents
Advertisement
8
> continued
To find a point in a track
You can find a particular point in a track
while the track is playing or while it's in
pause mode. Use the buttons on the remote
to operate this feature.
To
Press
P&P on the remote and
release it at the desired
point.
Go forward
quickly in a track
44 on the remote and
release it at the desired
point.
Go backwards
quickly in a track
Search quickly
without listening
IL, then press <4 or
PP on the remote. Press
CD C or Magain at
the desired point.
To check the remaining time during
playback
Press DISPLAY repeatedly.
Each time you press the button, the
display changes as follows:
Playing time on current track
v
Remaining time on current track
SF
Remaining time on current CD* or
"Play" display**
v
Clock display (for eight seconds)
v
Effect (or P FILE) name
*
1 DISC mode
** ALL DISCS mode
To check the total number of tracks
and the total playing time
Press DISPLAY in stop mode. The total
number of tracks and the total playing time
appear in the display for four seconds.
Notes
¢You cannot check the total playing time
during program play.
¢The disc number, total playing time and
number of tracks also appear in the
display when you press
2 OPEN /
CLOSE/EX-CHANGE to close the disc
tray.
e".---" appears in the display when the
total playing time is 100 minutes or more.
One Touch Play feature
Press [>I on the CD player (or CD E> on
the remote) when the power is off. When a
CD is in the player, you will be able to start
listening to the CD without pressing any
other buttons.
Chapter 2: the CD Player
The Music Calendar Display
This display lights according to the number
of tracks on the CD. As each track is played,
the corresponding number disappears.
Tracks numbered in excess of 20 are not
displayed.
What the green and orange DISC 1-3
button indicators indicate
indicators are provided on the DISC
buttons for each of the respective disc trays
(DISC 1-3).
° A green indicator shows that the tray is
selected (either during playback or
standby, or when the tray is open) no
matter if there is a CD inside or not.
* An orange indicator shows that there is a
CD on the tray but the tray is not selected.
¢ When the indicator is off, there is no CD
on the tray and the tray is not selected.
Automatic Source Selection
If the CD player has been in the normal
play mode, you can select the CD player
just by pressing [Bor the DISC 1-3
buttons.
It the CD player has been in the program
play or the shuffle play mode, only C>IE
can be used for this function.
If there is no CD in the player
"NO DISC" appears in the display.
Press [>Hi (or CD C= on the remote) while
the indication is on, then the CD tray will
open automatically.
DN
eran
Playing Tracks in
Random Order
(shuffle play)
You can play all the tracks on one CD or all
CDs in random order.
Use the buttons on the unit to do this
operation.
SYSTEM
POWER
> ON] Kd /P Pt
DISPLAY
a WwW
Neu
1 Press FUNCTION repeatedly until "CD"
appears in the display.
2 Place the CD(s) on the disc tray.
3 Press 1/ ALL DISCS to choose "1 DISC"
or "ALL DISCS".
4 Press PLAY MODE repeatedly until
"SHUFFLE" appears in the display.
5 ress CH.
"£3, appears and then all the tracks
play in random order.
To stop shuffle play
Press BF.
To cancel shuffle play
Press PLAY MODE repeatedly until
"SHUFFLE" or "PROGRAM" disappears
from the display. The tracks continue
playing in their original order.
To select a desired CD
Press DISC 1-3 during shuffle play.
To skip an undesired track
Turn the JOG dial clockwise (or press Pl
on the remote).
Advertisement
Table of Contents
