Chapter 4: The Tape Player; Playing A Tape - Sony MHC-W77AV Operating Instructions Manual

Chapter 4:
the Tape
Player
Playing a Tape
Recording a CD
Recording a CD: Selecting
Tape Length (tape select
edit)
Recording a CD: Specifying
Tape Length (time edit)
Recording a CD: Specifying
Track Order (program
edit)
Recording From the Radio
Recording From Another
Tape (dubbing)
1 4 Chapter 4: the Tape Player
Dp el
Playing a Tape
You can use TYPE I (normal), TYPE II
(CrO2) and TYPE IV (metal) tapes. When
you insert a tape, the deck detects the tape
type automatically.
SYSTEM
POWER > ON
1 <<>> <<>> 1
DOLBY NR
DIRECTION MODE
1 Press & EJECT to open tape
compartment.
Insert a recorded tape in deck A or B
with the tape side facing down and the
side you want to play facing forward.
Push to close the compartment.
2 Press & (to play the front side) or <J
(to play the reverse side).
The tape starts playing.
Press DIRECTION
To play
MODE to select
One side =
of the tape
Both sides* Ce)
Both decks RELAY
in succession**
* The deck stops automatically after
repeating the sequence five times.
** See "To play both decks in succession
(relay play)".
To Press
Stop play a
Pause IE PAUSE
(Deck B only)
Resume play after IEPAUSE
pause (Deck B only),
<< or
PP for front side
44 for reverse side
44 for front side
bP for reverse side
Remove the cassette & EJECT
Fast forward
Rewind
Using the remote
1 Press DECK A <J/C> or DECK B
</> to play the front side and press
DECK A <J/C> or DECK B </>
again to play the reverse.
2 Press the desired operation button.
To play both decks in succession
(relay play)
Relay play follows the sequence below.
When the reverse side of the tape in deck B
finishes playing, the sequence continues
four more times.
Deck A Deck A
(Front side) — (Reverse side)
Deck B Deck B
(Reverse side) |*—| (Front side)
1 Press & EJECT and insert recorded tapes
in both decks.
2 Press DIRECTION MODE repeatedly
until "RELAY" appears in the display.
3 Press <J or E> on either deck.
To stop relay play, press Ml.
To cancel relay play
Press DIRECTION MODE repeatedly until
— ==" or "C=) appearsin the display.
When listening to a tape recorded with the
Dolby* B-type noise reduction system
Press DOLBY NR button so that "DOLBY
NR B" appears in the display.
The setting affects both decks. Dolby noise
reduction system reduces tape hiss noise in
low-level high-frequency signals.
* Dolby noise reduction manufactured
under license from Dolby Laboratories
Licensing Corporation.
"DOLBY" and the double-D symbol DO
are trademarks of Dolby Laboratories
Licensing Corporation.
One Touch Play feature
Press [> or <J (or DECK A </> or
DECK B <J/E= on the remote) when the
power is off. When a tape is in the player,
you will immediately be able to listen to the
tape without pressing any other buttons. If
no tape is inserted, the system will just turn
on.