Playing Tracks In Random Order (Shuffle Play) - Sony MHC-W55 Operating Instructions Manual

continued
To find a point in a track
You can find a particular point in a track
while the track is playing or while it's in
pause mode. Use the buttons on the remote
to operate this feature.
To Press
Go forward ) on the remote and
quickly in a track release it at the desired
point.
Go backwards 0 on the remote and
quickly in a track release it at the desired
point.
Search quickly P, then press 0 or
without listening ) on the remote. Press
( or P again at the
desired point.
To check the remaining time during
playback
Press DISPLAY repeatedly.
Each time you press the button, the
display changes as follows:
mPlaying time on current track
µ
Remaining time on current track
µ
Remaining time on current CD* or
"Play" display**
µ
Clock display (for eight seconds)
µ
Effect (or P FILE) name
* 1 DISC mode
** ALL DISCS mode
To check the total playing time and
the total number of tracks
Press DISPLAY in stop mode. When you
press DISPLAY again, the display shows
the clock display for four seconds and
returns to the previous indication.
Notes
•You cannot check the total playing time
during programme play.
•The disc number, total playing time and
number of tracks also appear in the
display when you press § OPEN/
CLOSE/EX-CHANGE to close the disc
tray.
•"--.--" appears in the display when the
total playing time is 100 minutes or more.
One Touch Play feature
Press ·P on the CD player when the
power is off. When a CD is in the player,
you will be able to start listening to the CD
without pressing any other buttons.
8 Chapter 2: the CD Player
The Music Calendar Display
This display lights according to the number
of tracks on the CD. As each track is played,
the corresponding number disappears.
Tracks numbered in excess of 20 are not
displayed.
What the green and orange DISC button
indicators indicate
Indicators are provided on the DISC
buttons for each of the respective disc trays
(DISC 1–3).
•A green indicator shows that the tray is
selected (either during playback or
standby, or when the tray is open) no
matter if there is a CD inside or not.
•An orange indicator shows that there is a
CD in the tray but the tray is not selected.
•When the indicator is off, there is no CD
in the tray and the tray is not selected.
Automatic Source Selection
If the CD player has been in the normal
play mode, you can select the CD player
just by pressing ·P or the DISC 1 – 3
buttons.
If the CD player has been in the programme
play or the shuffle play mode, only ·P
can be used for this function.
If there is no CD in the player
"NO DISC" appears in the display.
Press ·P (or CD ( on the remote) while
the indication is on, then the CD tray will
open automatically.
Playing Tracks in
Random Order
(shuffle play)
You can play all the tracks on one CD or all
CDs in random order.
Use the buttons on the unit to do this
operation.
SYSTEM
POWER m ON
=/+
3
4
⁄
p
Æ
»
p
0 )
r P
⁄
DISC 1-3
1
Press FUNCTION repeatedly until "CD"
appears in the display.
2
Place the CD(s) on the disc tray.
3
Press 1/ALL DISCS to choose "1 DISC"
or "ALL DISCS".
4
Press PLAY MODE repeatedly until
"SHUFFLE" appears in the display.
CD
1 2 3 4 5
6 7 8
SHUFFLE
5
P r e s s · P .
" J " appears and then all the tracks
play in random order.
To stop shuffle play
Press p.
To cancel shuffle play
Press PLAY MODE repeatedly until
"SHUFFLE" or "PROGRAM" disappears
from the display. The tracks continue
playing in their original order.
To select a desired CD
Press DISC 1 – 3 during shuffle play.
To skip an undesired track
Turn the JOG dial clockwise (or press +
on the remote).
DISPLAY
1
5
» P
p
2
»
Æ
p
0 )
⁄
A VOLUME
DOLBY NR B OFF
63 125 250 500 1k 2k 4k 8k 16k(Hz)
DBFB