Playing Tracks In Random Order (Shuffle Play) - Sony FH-C33X Operating Instructions Manual

POWER-—-ON
MUSIC SCAN
Each time you press this button, the
display changes as follows:
M SCAN 10 => M SCAN 20
Playing mode _—_ Tracks played
Normal play
(ALL DISCS)
CDs.
:
Normal play
(1 DISC) CD in order.
Programme play
programmed order.
Notes on handling discs
*To keep the disc clean, handle the disc by
its edge. Do not touch the surface.
Do not stick paper or tape onto the disc.
Plays the first track on all
Plays all the tracks on the
Plays: all the tracks in their
Do not expose the CD to direct sunlight
or heat sources such as hot air ducts, nor
leave it in a car parked in direct sunlight
__as there can be a considerable rise in
temperature inside the car.
Sea ee el
Playing Tracks in
Random Order
(shuffle play)
You can play all the tracks on one CD or
all CDs in random order.
Use the buttons on the unit to do this
operation.
POWER-—+ON
CONTINUE
1 Insert the CD(s) in the disc tray(s).
2 Press SHUFFLE to choose whether to
play one CD (1 DISC) or all CDs (ALL
DISCS).
3 Press D>.
" £ 7)" appears and then all the tracks
play in random order.
To stop playing
Press Mi.
To cancel shuffle play
Press CONTINUE.
"SHUFFLE" disappears from the display,
and tracks continue playing in their original
order.
To play the next track during shuffle play
Press PD} DD].
To replay the current track, press Ki <4.
You cannot replay the previous track.
To select the desired CD
Press DISC 1 — 5 during "1 DISC" shuffle
play. You cannot select the CD with
DISC 1 —5 during "ALL DISCS" shuffle
play.
Playing in the
Desired Order
(programme play)
You can make a programme of up to 32
tracks from all the CDs in the order you
want them to be played.
POWER—ON
1 3
2,5 6
a
CONTINUE 4
CHECK
To programme tracks
You can programme one track or one whole
CD in each programme step.
1 Insert the CD(s) in the disc tray(s).
2 Press PROGRAM.
"PROGRAM" appears in the display.
3 Press DISC 1 — 5 to choose a CD.
To programme all tracks in the CD as
one programme step, repeat step 3 and
choose another CD.
4 Press kKK1 <<q or BR DPI] to choose a
track.
The disc number, the track number and
the total playing time appear. If you
want to choose this track, go to the next
step. If not, press KK] << or |
again to choose another track.
continue to next page >
Chapter 2: the CD Player
of