Sharp Viewcam Z VL-Z7U Operation Manual page 93

Available mode:
Card Playback
You can play back and view still images
recorded on a card on the LCD monitor.
1
2
election
Power switch
Operation button
switch
Set the Media Selection switch to _.
Hold down the Lock button and set
the Power switch to _.
o The images recorded on the card are
displayed in a thumbnail format.
Aw_SEL ECT I MGeFUIL_
Page number/total thumbnail pages
3 Press <, _--, '7 or z', on the Opera-
tion button to move the selection
frame to the desired image.
. Each tittle you press , _>, ;' or '_',,,
the selection frame moves as shown
below.
100-0001
PAGE1/2
NORMAL
AT4_SELECT IMGeFULL_MULTI
4
Note:
- Holding down _ or _-, increases the
speed of motion of the selection frame.
Press the center of the Operation
button.
o The selected image displays in fuIF
screen.
Image file name
Playback image number/ Picture qualH
number of recordings indicator
Available Operations during
Fuji.screen Display
- You can display the full-screen picture of
the previous or next image by pressing <
or ?-.
', When holding down < or :-, you can
search through the images on the card.
The search can be very fast, so it is
recommended that the on=screen
indicators turns on to display the image
number.
. To return to a thumbnail of the images,
press the center of the Operation button
again.
c:J
Notes: u:_'
• You can also set in the mode screen to display _,:
the images in full screen or thumbnails
• Depending on the amount of data for the _'n
recorded image, the picture quality indicator =
displayed during playback may not match the
picture quality setting used during recording.
• The images bigger than 1280 × 960, eg images
recorded on other equipment, display as
thumbnails, not full screen
• Do not play back any card storing a defective _'
image (with noise and distortion) created on ,_
other equipment If you mistakenly play back
data on such a card, set the Power switch to
OFF, remove, and never use it with this
camcorder
79