Sharp Viewcam Z VL-Z7U Operation Manual page 23

You can also power the camcorder from a
power outlet by using the supplied AC
adapter.
Note:
,, The supplied AC adapter is specially
designed for use with this camcorder, and
should not be used as a power supply for
other camcorders.
1 Make sure that the Power switch is
set to OFR
2 Open the DC IN jack cover.
Notes:
• BEFORE REMOVING THE DC PLUG,
ALWAYS STOP RECORDING OR PLAY-
BACK AND TURN THE POWER OFF.
Removing the DC plug while shooting or
during playback may damage the tape by
causing it to wrap around the video head
drum or destroy the card, rendering it
unreadable and unwritable.
• Disconnect the AC adapter from the
camcorder if you win not use the camcorder
for a long period of time.
DC IN jack cover
3 Insert the DC plug into the DC IN
jack of thecamcorder( ),andplug
the AC plug into a power outlet (2).
POWER/CHARGE (RED)indicator
power outlet
Hold down the Lock button and set
the Power switch to i31 or _.
_, The POWER/CHARGE (RED)
indicator lights up green.