Sharp Viewcam Z VL-Z7U Operation Manual page 83

Audio Dubbing
1 Play back the Mini DV cassette
recorded in SP mode and locate the
tape position where you wish to start
audio dubbing.
2
3
4
Press ..Aon the Operation button to
pause playback.
Press the DISPLAY button until the
mode screen appears.
Press '_,.'or .' to select "AUDIO
L_
DUB", then press the center of the
Operation button.
Press ./ or .,_.to select "EXECUTE",
then press the center of the Operation
button.
o The audio dubbing screen appears.
TCO:O0:O0
AtlOlOl+ 2 | |
AUDIO DUB
©
• START •STOP eCAHCEL
Press ,.', to begin audio dubbing.
Record your narration.
if you wish to change the
dubbed audio or dub addi.
tional scenes
1 Press the DISPLAY button to turn off
the audio dubbing screen.
2 Repeat steps 1 to 6 above.
Notes:
,, It is recommended that you use Audio
Dubbing only with recordings made with this
camcorder. Use of recordings made with
other digital video equipment may result in
poor audio quality.
• Audio dubbing will automatically pause if the
original audio changes from 12-bit mode to
16-bit mode or vice versa. Press .A, to
resume operation.
• Audio dubbing will automatically stop if a
portion recorded in LP mode or an unre-
corded portion of the tape is encountered.
• You can play back the dubbed audio and the
original audio together or separately (see
page 70).
• "AUDIO DUB" cannot be selected when the
Mini DV cassette is recorded in LP mode.
To pause audio dubbing
Press .;. To resume audio dubbing, press
/., again.
To cancel audio dubbing
Press the center of the Operation button in
step 5. The audio dubbing screen disap-
pears.
69