Sharp Viewcam Z VL-Z7U Operation Manual page 103

Available mode:
Card Playback
You can automatically play back consecu-
tive still images recorded on a card at
intervals of 5 seconds. This is useful when
confirming the data recorded on a card.
1 Set the camcorder to Card Playback
mode.
Press <, >, ,/ or ..A, o n the
Operation button to select the image
from which you want to begin slide
show playback.
100-0003
PAGE1/2
NORMAL
Av_SELECT IMGeFULLe_,MULTI
3 Press the DISPLAY button until the
mode screen appears.
4 Press ,/ or .._,to select"MENU", then
press the center of the Operation
button.
Press ,,/ or .*, to select"EXECUTE",
then press the center of the Operation
button.
6
7
Press ,/ or /,. to select ,_, then
press the center of the Operation
button.
Press ,/ or L, ,' to select"SLIDE
SHOW", then press the center of the
Operation button.
Press ,/ or .._. to select"EXECUTE",
then press the center of the Operation
button.
o Beginning from the image selected in
step 2, the recorded images will
display in full-screen one after
another in order of recording.
9
, After playing back all the images on
the card once, slide show playback
automatically stops.
Press the DISPLAY button to turn off
the menu screen.
To stop slide show playback
During slide show playback, press the
center of the Operation button.
w,
u_
89