Advertisement
Initializing the VZ-IOM_________———_—i//
'The VZ-10M can be"
in a number of ways, allowing you to
reset the entire VZ-1OM to its initial factory settings or initialize only the
data of a specific MODE or FUNCTION, for example. The following
describes the various VZ-10M initializing procedures.
SYSTEM ALL INITIALIZE
'To initialize all VZ-10M internal operation memory, voice and effect data
to factory preset values, hold down the WRITE key and turn VZ-10M
power ON. Respond to the YES? prompt by pressing the YES key. All
internal data is reset to its original state as listed on page 99.
'To initialize all parameters in any single MENU 1 function for a selected
MODULE, simply press the MENU 1 key and use the value controls t0
'select the desired function. Then hold down the WRITE (COPY/INITIAL-
IZE) key and respond to the prompt by pressing the YES key.
'The values of all parameters
in the selected function
are then reset to their
initialized state (see page 100). Parameter values in other functions,
however, remain unaffected.
MENU 100 LINE (MIM2-M7™M8)
When this parameter is initialized, LINE DATA of all modules (MI-M8)
are initialized automatically.
0
PUSH YES KEY!
COPY INIT
COPY? >SELECT
2 sve
K e
«cae NIT
uz
VIBIAND
|
Advertisement
