Advertisement
Performance/Editing in the Operation Memory Mode.
/
'The OPERATION MEMORY mode can be used to store effect and sound
data from up to 64 sounds (patches or combined sounds) from the VZ-10M
internal memory or card memory.
To copy data from the Normal Mode memory into the Oper-
ation Memory
After entering the Normal Mode, select the Play sub-mode by pressing
the PLAY key.
@Hold down the WRITE key. The display appears as shown on the right.
@Whilte still holding down the WRITE key, select the patch you want
to WRITE by first pressing either the INTERNAL key or the CARD.
key, and then pressing a BANK key (letters
A through H) and a VOICE
selector (numbers 1 through 8)
®Once you've completed writing combined sound data to the operation
'memory, you can give it a name by using the OPERATION NAME.
function in Menu 2 (MENU 2-00). (After assigning a name, you must
re-write the sound again to the Operation Memory. The OPERATION
NAME function can only be set while in the OPERATION MEMORY
mode.)
'To write operation memory data from one operation memory
to another
@Atier entering the Operation Memory Mode, select the operation you
'want to transfer by pressing a BANK key and a VOICE selector.
ig a
Do
"WRITE
ms
UOICE BATA
Ee
| eer MEMORY!
xt
Uf
| OPERATION DATA
SELECT MEMORY!
cy
wr
COCR COT
vote Bata
ox!
LES
ares]
Advertisement
