Advertisement
13
TREMOLO
Parameters
0/8 _| MENU 1 — VALUE — MENU 1 — VALUE
WAVE=TRIANGLE/SAW UP/
DELAY =00~99
MULTI=ON/OFF
Pages|
1 | Graphic Editing
'YES
Domain |
GLOBAL
Related Functions
(MENU 1-14)
f
|Fiaeue' seen ue
peeTH=se
ire =e
BeLav=i®
focrt=o
'A
Tremolo is a form of low-frequency oscillation which af-
fects the DCA to produce cyclical changes in volume
characteristics. The parameters in this function are used
to.reate a "tremolo" effect globally. Note, however, that
Settings for parameters in MENU 1-14 (AMP SENS) can.
bbe made independently for each module, This allows you
to control the depth of each module independently, while
settings in the TREMOLO function (MENU 1-13) are used
to create and control the "actual" tremolo oscillation.
'You can use the DEPTH parameter to set the "depth" of
tremolo oscillation (how strong the tremolo is). The larger
the value, the deeper the tremolo effect. (If this parameter
is set to 00", no tremolo will be generated. Be sure to
raise this level before altering other parameter settings.)
'The RATE parameter is used to set the "speed" of
tremolo oscillation. The higher the value, the faster the
tremolo effect.
'The DELAY parameter is used to set the period of time
from initial key depression until the point where tremolo
oscillation begins. The larger the value, the longer the de-
lay before tremolo is applied,
'The MULTI parameter features a toggle which can be set
to either ON or OFF. When MULTI is set to ON, the
tremolo effect is engaged independently as Note On mes-
sages are received, so that each note's tremolo is indepen
dent (not synchronized with tremolo delay and oscillation
Of messages received previously or subsequently). When this
parameter is set to OFF, tremolo oscillation is synched for
all keys, regardless of when the note on messages are
received (in unison or independently).
NOLL
| TVIH
|
Triangle ~ produces a smooth "pulsating" volume shift
Saw Up ~ produces a repeating rise and then cutoff in volume.
'Saw Down ~ produces a repeating "swoop" down in volume.
'Square — produces an "on and off volume characteristic.
Advertisement
