Advertisement
E2
state,
the internal line of LINE A is set to MIX, while LINE B
PHASE - i.e. M3 becomes
the phase of M4. (@)
'this state, EXTERNAL PHASE from LINE A is specified, the
'changes to that shown on the right, and the resulting waveform
'output through LINE B. Once again, LINE A does not sound,
only as the phase of LINE B. (®)
this abit clearer, think of how a guitar player uses preamp stages
distortion, With only one volume control, the guitarist must
LOUD to overdrive his amp and get a warm, distorted sound.
If he adds a preamp or has a master volume control, he can
hhis amp and still maintain a reasonable volume level. (1)
'more amplifiers, the guitarist could theoretically create an in-
'buzz", as the distortion can be compounded with each
rol. (@)
Advertisement
