Advertisement
@Press the OPERATION MEMORY key.
@White still holding down the WRITE key, select the memory to which
'you want to write the patch (INTERNAL or CARD Key, followed by
'ACH and 1-8 selectors),
'When writing is completed successfully, an "OK!" message appears on
the display.
To edit sound and effect data
Because the combination mode allows you to work with up to 4 patches
at a time, you must first specify the patch you want to alter when editing
sound data.
@Enter the PLAY sub-mode and move the cursor to the patch position
'corresponding to the patch you want to edit.
@Press the MENU 1 key. You can now access sound-related functions
in MENU
1 to edit the sound parameters of the selected patch.
For further data on MENUs, FUNCTIONS and PARAMETERS, refer
to page 16.
ser
oPeRHTLON DATA
OK!
ih
|
oo)
INTERNAL=OFF
|
CARO
=ON
Advertisement
