Advertisement
@Hold down the WRITE key.
@Select the operation memory you want to transfer the selected opera-
tion memory to by pressing a BANK key (letters A through H) and
a VOICE selector (numbers 1 through 8).
When writing is completed successfully, an "OK !" message appears
cn the display.
@Once you've completed transferring the operation memory data, you
can give it another name by using the OPERATION NAME function
in Menu 2 (MENU 2-00). (After assigning a name, you must re-write
the sound again to the Operation Memory).
If the memory protect function (MENU 3-01) is ON, writing will be
'impossible. In this case, you must first tur the protect function OFF
bby accessing MENU 3-01, reenter the PLAY mode and perform write
'operations again. Also, if the COMPARE/RECALL function is ON,
writing will be impossible.
Note that writing 10 the operation memory must be performed in the
PLAY sub-mode.
To edit sound and effect data you've already written,
preset sounds or sounds from RAM or ROM cards
'You must first move the sounds of the selected Operation Memory back
to the COMBINATION or NORMAL MODE memory.
@White in the Operation Memory mode, select the patch that you wish
to edit.
'This will write the Operation back into the combination buffer
so you
can access all of the functions (except for menu 2-00 and 10) to re-edit
your combination or normal sound - months or even years after you
originally created it!
@When you've finished editing the sound, re-write it using normal write
operations.
~35-
O
SS CELLET
HN CH
MITES Ro]
| 1"
th
|
| INTERNAL =OFF
CARD
ON
0
a 4
Advertisement
