Advertisement
'Next, specify that you want to work in the MENU 1 sub-mode by
pressing
the MENU 1 key.
If you've previously worked in the MENU 1 sub-mode, the function you
selected last will automatically be recalled at this point. For our example,
let's assume you last worked in MENU 1-06 (DCO VELOCITY LEVEL).
Notice that the function number flashes on the top line of the display (this
indicates the "cursor" postion). In this state, you can select function num-
ber with the VALUE controls (the value slider or value keys).
'Now take a look at item @ in the VELOCITY RATE Function Index.
'You'll notice that the "Domain" is listed as being "Global." This means
that settings made in this function affect all VZ-10M sounds (as opposed
to affecting only a single module, single line, etc).
'Many VZ-10M functions feature a "modular" domain. In these cases, a
MODULE number will appear at the right of the display. This indicates
'the module that is presently selected ("M2" for example) - and any set-
tings that are made will affect only this module. You can select a differ-
'ent module by pressing any MODULE SELECTOR.
3 Use the value controls to select MENU 1-17 (VEL RATE).
Look at item @ in the index. Here are listed all the parameters contained
in each function, as well as related information such as the range in which
values can be set. You'll find this comes in handy in VZ-10M editing, as
you can look up individual parameters easly without actualy accesing
'8 function on the VZ-10M.
'To "access" the parameters contained in this function, press the
MENU 1 key once again.
Notice that the cursor now moves to the first parameter in the function
= SENSITIVITY.
'At this point, take a look at item @ in the Function Index. Note that
the selected function features a total of 3 "display pages" - which means
that only some of the parameters contained inthis function are presently
displayed. The others can be accessed by pressing the MULTI AREA
(PAGE/ZOOM) keys.
'Try pressing the MULTI AREA keys - notice that you can "turn" display
pages with these keys to select the parameters you want to edit.
-21-
SENSITIUITY=00 |
CURVE
=I |
j
\
|
|
) SENSITIUITY=00 |
eaisgae
st |
pu 03
|__S §33)
f
||
) sensrrrurrvsiée
bi sie
al
|| errea exe
| | step 12345678 ||
| SEle=teeceers
|
rent 633)
'
Advertisement
