Advertisement
'COMBINATION
ll
VEL SPLIT
|
Parameters
| O/S | MENU 2 — VALUE — MENU 2 — VALUE |
| Pages
1 | Graphic Editing
NO
RANGE =001~127
[Domain | __ COMBINED SOUNDS (Layered)
Related Functions
'The parameters in this function are used to specify VZ-10M
"velocity split" characteristics in the Combination Mode.
Depending on KEY ASSIGN specifications, between one
and four velocity split "ranges" are assigned using these
parameters.
By a s s i g n i n g
maximum and minimum "velocity" values
(001 ~ 127) to each patch in a combined sound, you can
create a "velocity range" wherein the specified patch will
sound. If velocity message
is transmitted at a velocity lev-
cl that is outside this range to VZ-10M, the specified patch
will not sound.
'Note that this function differs from the "KEYBOARD
is VEL SPLIT can only be used with
KEY ASSIGN configurations containing "layered" (+)
patches such as"*1 +2" or"1 /3+4"),as opposed to KEY
ASSIGN configurations containing only "split" points
(such as "1/3" or
If the parameters in this function are accessed when a KEY
ASSIGN configuration has been selected which contains
only keyboard split points — without any "layered"
patches, the display appears as in FIG-D,
Note also that the numbers
of each parameter correspond.
with KEY ASSIGN patch numbers, Consequently, the
umber of
"active" parameters in this function will be
directly related to the present KEY ASSIGN configuration
(see "KEY ASSIGN," page 81).
If you want 10 use velocity split, you must first exit MENU.
2-11 (VEL SPLIT) by pressing the COMBINATION key
'once again, and choose a KEY ASSIGN configuration
which contains layered patches (for example, "1 +2"). (See
FIG-D)
—63—
Advertisement
