Advertisement
DELAY TRIGGER
Parameters
O/S | MENU 2 — VALUE — MENU 2 — VALUE
Pages
|_|
Graphic Editing
NO
paAreae
Tema | -CuueR SAAD
Related Functions
"The delay trigger function can be used to "delay" the
NOTE ON message for any layered patches) in a com-
bined sound. Delay time is increased as the DELAY
'parameter value is raised. At a value of "00", the patch
'is sounded immediately after Note On message received,
at a value of "99", there isa long delay before the
ich sounds.
'Note that this function can only be used with KEY
"ASSIGN configurations containing "layered" (+ ) patches
as "1 +2" or "1/3 +4"), as opposed to KEY ASSIGN
rations containing only "split" points (such as
#1/3" or "1/2/3/4").
the parameters inthis funetion are accessed when a KEY
"ASSIGN configuration has been selected which contains
Note also that the numbers of each parameter correspond
with KEY ASSIGN patch numbers. Consequently,
the
umber of "active" parameters i n
t h i s function will be
directly related to the present KEY ASSIGN configuration
(see "KEY ASSIGN," page 81),
If you want to use DELAY TRIG and a KEY ASSIGN
'configuration is selected which contains only split patches
(such as 1/3), you must first exit MENU 2-14 (DELAY
TRIG) by pressing the COMBINATION key once again,
and choose a KEY ASSIGN configuration which contains
layered patches (for example, "1 +2"),
NOLL
Advertisement
