Storage - Scheppach TBD55 Original Instruction Manual

• Remove the insertion tool as described in 10.4.2.
• Tighten the clamping sleeve (E) firmly, by turning the chuck key clock-
wise.
• Hold the drill-chuck with one hand and turn the nut (H) clockwise with
the open-ended spanner (27 mm).
• As soon as you have loosened the drill-chuck from the shaft, you
can remove it.
• Fasten the new chuck in reverse order.
When replacing the chuck, use only chucks approved by the manu-
facturer.
Order number: 390 6814 001
12.5 Service information
With this product, it is necessary to note that the following parts are
subject to natural or usage-related wear, or that the following parts are
required as consumables.
Wear parts*: Carbon brushes, drill bit
* may not be included in the scope of supply!
Spare parts and accessories can be obtained from our Service Centre.
To do this, scan the QR code on the front page.

13. Storage

Store the device and its accessories in a dark, dry and frost-free place
that is inaccessible to children. The optimum storage temperature lies
between 5 and 30 °C.
Store the electric tool in its original packaging.
Cover the electrical tool in order to protect it from dust and moisture.
Store the operating manual with the electrical tool.
www.scheppach.com
GB | 57