Dimplex DEE 1521 Assembly And Operating Instructions Manual page 15

DEE 1521, DEE 2127
4.9.1 Specifying the maximum electrical power
Specify the maximum power of the device using link
cables J2 and J3 according to the table below.
DEE 1521 DEE 2127
21 kW 27 kW
(Default setting) (Default setting)
18 kW 24 kW
15 kW 21 kW
If you change the default setting, note the new maxi-
mum power on the type plate of the device.
NOTE
If you are changing the power of the device, check
which flow limiter should be used (see chapter 9.).
www.dimplex.de
Link cables J2 / J3
6721873500 (2023/07)
4.9.2 Specifying the maximum temperature
Set the maximum hot water temperature generated
by the device using link cables J4 and J5 according to
the table below.
Maximum temperature
60 °C
=> default setting
53 °C
=> required if the device is oper-
ated on a shower
48 °C
=> power saving setting
42 °C
=> special protection of persons
in need
English
Link cables J4 / J5
EN-15